ZB ZB
Live now
Start time
Playing for
End time
Listen live
Listen to NAME OF STATION
Up next
Listen live on
ZB

Why firefighters can't put out SkyCity blaze

Author
Newstalk ZB, NZ Herald,
Publish Date
Tue, 22 Oct 2019, 7:15PM
The roof has been abandoned as fire fighters struggle to contain the blaze. (Photo / NZ Herald)

Why firefighters can't put out SkyCity blaze

Author
Newstalk ZB, NZ Herald,
Publish Date
Tue, 22 Oct 2019, 7:15PM

Parts of the blaze engulfing SkyCity's Convention Centre are too dangerous for firefighters to battle on the roof and too hard for a cherry picker to reach, officials say.

Auckland Mayor Phil Goff has told reporters that fire crews have "abandoned the roof and current goal is to stop fire from spreading below level five," he said. 

“They say this will be burning all night.

"We won’t know until there is a full assessment, but I can’t imagine this will take anything other than months to repair, construction put on hold and a lot will have to be torn down and started again.”

Fire and Emergency assistant area commander Stephen Sosich said the fire was still not under control, and was getting bigger.

"It is a very difficult fire to put out. The fire is wedged between two concrete layers in the roof. It is too dangerous for crew on the roof, but very hard to reach from our aerial appliances."

Sosich said they were adequately resourced and it was just a matter of time before they brought the fire under control. Strong winds were also a factor.

Smoke billowing out of the building mixed with melting bitumen layer on the roof was dangerous to people nearby, and fire officials was warning people to stay out of the area.

Public health officials are warning people to wear masks as the black smoke from the fire is dangerous. Photo / Dean Purcell

Industry experts say the fire may have started when a primer, rather than the roofing membrane, ignited.

There is speculation the blaze started when a worker left a blowtorch, which was being used on roofing membrane, unattended during a smoko break.

However, experts have told the Herald the bitumen-based membrane was used on thousands of projects around the country everyday and would be unlikely to catch fire.
The primer, which goes on underneath the membrane, is however flammable and classified as a hazardous substance.

The General Manager of a company that manufactures and imports of roofing membrane, said the membrane is rolled out over the primer and heated up with a naked flame to create an adhesive surface.

While the man, who didn't want to be identified, did not know what happened he said it was possible a person laying the membrane could have left the gas torch on near a primed part of the roof and that was what caught fire, not the actual membrane.

It that was the case he said the worker would have been highly negligent in their work.

"The rule of thumb there is when you are not actually torching the membrane on the roof the torch should be turned off."

He compared it to someone using a BBQ - you turn the gas off when you aren't using it then turn it back on when you come back later on.

Others in the industry said the membrane, which creates a final waterproof and UV resistant surface on the roof, is heat resistant and the torch would need to have been left on it for a long time in order for it to catch fire.

The head of another company said even if the torch was left on by mistake it is very loud and it would be surprising someone didn't hear it.

 

Take your Radio, Podcasts and Music with you